Application Instructions easy-guard

easy-guard CLASS "0" System
1. Attend site and carry out adhesion tests to all pre-painted wall and ceiling surfaces.
2. Identify any areas of weak intercoat adhesion and scrape back to a hard edge.
3. Feather off as necessary and fill holes or hollows using a high quality filling compound.
4. Thoroughly abrade all glossy/hard surfaces. Wash down and degrease with easy-guard Wash Down Agent and rinse with clean water.
5. To clean dry surfaces apply one coat of easy-guard Class "0" Bond Primer by brush or roller at a coverage rate of 14-16m² / litre. Allow at least 1 hour drying time.
6. Apply 1 coat of easy-guard Class "0" Barrier Compound by brush/roller to a depth of 2.5mm to approved finish. Allow at least 2 days drying time. When hard, dry lace down as necessary.
7. Apply 1 full coat of easy-guard Class "0" Colour Coat by brush/roller rate of 6-12m²/ litre. Allow at least 8 hours drying time.
8. Apply one coat of easy-on protective coating by brush or roller at a rate of 30m²/litre

______________________________________________
easy-guard Fire Upgrading System
1. Attend site and carry out adhesion tests to all pre-painted wall and ceiling surfaces.
2. Identify any areas of weak intercoat adhesion and scrape back to a hard edge.
3. Feather off as necessary and fill holes or hollows using a high quality filling compound.
4. Thoroughly abrade all glossy/hard surfaces. Wash down and degrease with easy-guard Wash Down Agent and rinse with clean water.
5. Spot prime any bare or filled patches with one coat of easy-guard Fire Upgrading Primer thinned 10% with clean water.
6. Apply 1 full coat of easy-guard Fire Upgrading Primer by brush/roller at a coverage rate of 8m² / litre. Allow at least 24 hours drying time.
7. Apply 1 full coat of easy-guard Fire Upgrading Colour Coat by brush/roller at a coverage rate of 8m²/ litre. Allow at least 24 hours drying time.
8. Apply one coat of easy-on protective coating by brush or roller at a rate of 30m²/litre